New Forest Safety Ltd

Insights

How Designers Influence Construction Risk

26 August 2026 · Harriet Calvert

The safest construction projects don't begin when the first spade enters the ground. They begin when the first line is drawn.

When people think about construction safety, they often picture hard hats, high-visibility clothing, scaffolding and site inspections. Safety is naturally associated with the construction phase because that is where the physical risks are most visible. Workers operate heavy machinery, work at height, excavate deep trenches and coordinate complex activities in constantly changing environments.

Yet many of the risks encountered on site are not created there.

They originate much earlier, during the design process.

Every decision made by an architect, structural engineer, building services designer or client has the potential to influence how safely a project can be constructed, maintained, altered and eventually demolished. A poorly positioned roof plant may require maintenance engineers to work at height throughout the life of the building. An awkward structural detail may force contractors to adopt more hazardous construction methods. In contrast, a thoughtful design decision made during the planning stage can eliminate a hazard entirely before anyone arrives on site.

This principle lies at the heart of modern construction safety. Rather than relying solely on protective equipment or site controls, the industry increasingly recognises that the most effective way to reduce risk is to remove it through good design.

At New Forest Safety, we work with clients and design teams to identify these opportunities as early as possible. The earlier risks are considered, the easier, and often less expensive, they are to eliminate.

Design Is the First Safety Control

Every construction project begins with a series of decisions.

Where will the building be located?

How will people access it?

What materials will be used?

How will services be installed?

How will the structure be maintained once construction is complete?

These questions are often viewed as design or engineering challenges, but they are equally important from a health and safety perspective.

Imagine a commercial building with rooftop air conditioning units.

The obvious question is whether the roof can support the equipment.

The less obvious, but equally important question is how that equipment will be maintained over the next thirty years.

Will engineers have safe access?

Is permanent edge protection required?

Can components be replaced without lifting heavy equipment over occupied areas?

Could the plant be relocated to ground level instead?

These decisions are far easier to address on a drawing than after construction has been completed.

Good design considers not only what is being built, but how people will safely interact with it throughout its entire lifecycle.

Eliminating Risk Is Better Than Managing It

Health and safety professionals often refer to the hierarchy of control, which places elimination at the top of the list.

The principle is straightforward.

If a hazard can be removed entirely, there is no need to rely on procedures, supervision or personal protective equipment to control it.

Design provides one of the greatest opportunities to achieve this.

For example, specifying prefabricated structural components may reduce the amount of work carried out at height. Designing permanent lifting points into plant rooms can remove the need for temporary lifting arrangements during future maintenance. Locating valves, meters and control panels at ground level may eliminate the need for ladders or mobile access equipment.

None of these changes require workers to behave differently.

Instead, they make the safer option the easiest option.

This is one of the reasons why good design has such a lasting impact on safety performance.

Decisions Have Long-Term Consequences

Construction projects may last months or years.

Buildings often remain in use for decades.

A design decision made today may influence thousands of maintenance activities over the lifetime of the asset.

This long-term perspective is sometimes overlooked.

It is easy to focus on completing the project safely, but the responsibilities of designers extend much further.

Consider a glazed façade that requires regular cleaning.

If permanent access systems have not been incorporated into the design, future maintenance teams may need to rely on temporary platforms or specialist access equipment every time cleaning is required.

What initially appeared to be an architectural decision has now introduced an ongoing operational risk.

Similarly, plant rooms with limited access, poorly positioned service routes or confined maintenance spaces may create difficulties for engineers long after the original construction team has left the site.

Good designers think beyond handover.

They ask how people will inspect, maintain, repair and eventually replace the systems they are designing.

Construction Is Rarely Linear

Construction projects are dynamic.

Designs evolve.

Client requirements change.

Ground conditions differ from expectations.

New information becomes available as work progresses.

These changes are entirely normal, but they also reinforce the importance of ongoing communication between designers and those delivering the work.

A detail that appears straightforward on paper may present practical challenges once construction begins.

Likewise, contractors often identify opportunities to improve safety based on their experience of similar projects.

The most successful projects create an environment where these conversations happen early and openly.

Rather than treating design as a completed exercise, it becomes an ongoing process of collaboration and refinement.

This is one of the key reasons why coordination is so heavily emphasised within the Construction (Design and Management) Regulations 2015.

Temporary Works Deserve the Same Attention

When people think about design, they often focus on the finished building.

However, many of the greatest construction risks arise during the temporary stages of a project.

Excavations require support.

Steel frames need temporary stability.

Concrete structures require formwork.

Cranes need carefully planned lifting operations.

Access arrangements change as the building develops.

Temporary works are, in many respects, construction projects within construction projects.

Poor planning at this stage can introduce significant risk, while thoughtful coordination can eliminate many hazards before work begins.

Effective design therefore considers not only the completed structure but also how it will safely be built.

Communication Is Just as Important as Drawings

Producing high-quality drawings is only part of good design.

Equally important is ensuring that information is communicated effectively.

Residual risks, those that cannot reasonably be eliminated through design, should be clearly identified and shared with those responsible for planning and carrying out the work.

For example, a structural element may require a specific lifting sequence to maintain stability. Underground services may remain live during certain phases of construction. Existing structures may contain hidden hazards that cannot be removed before work begins.

Sharing this information allows contractors to develop appropriate control measures and avoid making assumptions that could place people at risk.

Communication is therefore not simply an administrative requirement.

It is a critical safety control in its own right.

The Value of Early Collaboration

Some of the best design solutions emerge when clients, designers, engineers and contractors work together from the earliest stages of a project.

A contractor may suggest a safer construction sequence.

A maintenance engineer may identify future access difficulties.

A facilities manager may recommend relocating equipment to simplify servicing.

Each perspective adds value.

Waiting until construction has begun often limits the options available. Changes become more expensive, programmes become more difficult to adjust and opportunities to eliminate hazards may already have been lost.

This is why early engagement consistently produces better safety outcomes.

It also tends to improve buildability, reduce delays and create buildings that are easier to maintain throughout their operational life.

The Role of the Principal Designer

The Construction (Design and Management) Regulations 2015 recognise that effective coordination does not happen automatically.

Where more than one contractor is involved, clients are required to appoint a Principal Designer to plan, manage and monitor the pre-construction phase.

The Principal Designer's role is not to redesign buildings or approve architectural decisions. Instead, they coordinate health and safety matters, encourage collaboration between designers and ensure that foreseeable risks are identified and managed as designs develop.

This often involves challenging assumptions, facilitating design reviews and helping project teams balance functionality, aesthetics, cost and safety.

At New Forest Safety, our Principal Designer service focuses on exactly this process. We work alongside clients and design teams to ensure that health and safety is considered as an integral part of good design rather than an afterthought.

By identifying risks early, coordinating communication and promoting practical solutions, we help projects progress more safely and efficiently.

How New Forest Safety Can Help

Good design is about much more than meeting planning requirements or producing technically accurate drawings. It is about creating buildings that are safe to construct, safe to use and safe to maintain throughout their entire lifecycle.

At New Forest Safety, we support clients, architects, engineers and contractors through every stage of the design process. Our Principal Designer services help project teams comply with the CDM Regulations while embedding practical risk management into everyday design decisions.

Whether reviewing design risk registers, facilitating design workshops, coordinating pre-construction information or supporting planning meetings, our objective is always the same: eliminating risk wherever possible and managing it effectively where it cannot be removed.

Final Thoughts

The construction industry has made enormous progress in recognising the influence of design on safety. Rather than viewing health and safety as something that begins when work starts on site, organisations increasingly understand that many of the most important decisions have already been made long before construction begins.

Every design choice has consequences. Some make work simpler, safer and more efficient. Others unintentionally introduce risks that remain throughout the life of the building.

The challenge is not to eliminate every hazard, an impossible task, but to ensure that foreseeable risks are identified, discussed and reduced as far as reasonably practicable while changes are still easy to make.

At New Forest Safety, we believe good design and good safety are inseparable. The best projects are not those that simply comply with legislation; they are those where thoughtful planning, effective collaboration and intelligent design create safer outcomes for everyone who builds, uses and maintains the finished asset.

← All insights